Mitutoyo Digimatic Holtest Three-Point Internal Micrometer Sets

These are three-point internal micrometers that offer you the following benefits:

• Interchangeable head set.
• Titanium-coated measuring pins give you excellent durability and impact resistance.
• They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
• Large LCD display with character height of 7.5mm enables you to read measurements easily.
• With setting rings and extensions.

Features:

• TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole.(up to 100mm/4″models)
• Large LCD readout.
• Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm.
• With Ratchet Stop for constant force.
• Can measure deep holes by attaching an Extension rod(optional).
• Setting rings for origin point setting are optional.
• Supplied in fitted plastic case up to 100mm / 4″. Over 100mm / 4″ supplied in wooden case.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.001mm or .00005″/0.001mm (over 5″ models: .0001″/0.001mm)
• Contact point: TiN-coating
• Measuring method: Three-point method
• Display: LCD
• Battery: SR44 (2 pcs.), 938882
• Battery life: Approx. 8 months under normal use

Function:

• Zero-setting, Data hold, Data output, Preset, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Optional Accessories:

• 05CZA662: SPC cable (1m / 40″)
• 05CZA663: SPC cable (2m / 80″)
• 04AZB157: Mounting plate for stand
• 156-101: Stand
• 952322: Extension rod 100mm / 3.94″ For range 6-12mm / .275 – .5″ models
• 952621: Extension rod 150mm / 5.9″ For range 12-20mm / .5″ – .8″ models
• 952622: Extension rod 150mm / 5.9″ For range 20-50mm / .8″ – 2″ models
• 952623: Extension rod 150mm / 5.9″ For range 50-300mm / 2″ – 12″ models

Specifications:

Order No Range Individual
Range Setting Rings
Included Remarks 468-976 0.275 – 0.5″
6.925 – 12.7 mm 0.275 – 0.35″
0.35 – 0.425″
0.425 – 0.5″ 0.35″ DIA
0.425″ DIA with extension rod 468-977 0.5 – 0.8″
12.7 – 20.32 mm 0.5 – 0.65″
0.65 – 0.8″ 0.65″ DIA with extension rod/
with TiN-coated contact points 468-978 0.8 – 2″
20.32 – 50.8 mm 0.8 – 1″
1 – 1.2″
1.2 – 1.6″
1.6 – 2″ 1″ DIA
1.6″ DIA with extension rod/
with TiN-coated contact points 468-979 2 – 4″
50.8 – 101.6 mm 2 – 2.5″
2.5 – 3″
3 – 3.5″
3.5 – 4″ 2.5″ DIA
3.5″ DIA with extension rod/
with TiN-coated contact points 468-980 4 – 8″
101.6 – 203.2 mm 4 – 5″
5 – 6″
6 – 7″
7 – 8″ 5″ DIA
7″ DIA with extension rod/
with TiN-coated contact points 468-986 0.275 – 0.5″
6.925 – 12.7 mm 0.275 – 0.35″
0.35 – 0.425″
0.425 – 0.5″ 0.35″ DIA
0.425″ DIA – 468-987 0.5 – 1″
12.7 – 25.4 mm 0.5 – 0.65″
0.65 – 0.8″
0.8 – 1″ 0.65″ DIA
0.8″ DIA with TiN-coated contact points 468-988 1 – 2″
25.4 – 50.8 mm 1 – 1.2″
1.2 – 1.6″
1.6 – 2″ 1.2″ DIA
1.6″ DIA with TiN-coated contact points 468-989 2 – 3″
50.8 – 76.2 mm 2 – 2.5″
2.5 – 3″ 2.5″ DIA with TiN-coated contact points 468-990 3 – 4″
76.2 – 101.6 mm 3 – 3.5″
3.5 – 4″ 3.5″ DIA with TiN-coated contact points