Mitee-Bite Dyna-Force Clamps

Dyna-Force Clamps

The majority of the Dyna-Force clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile. The clamp jaw slides on an angle for positive downforce.

The clamp jaw is available with smooth or serrated faces.

The support surface of the Dyna-Force clamp can be installed flush with the fixture plate or raised to hold the workpiece off the fixture, enabling drill-through.

Features:

• Incredible Clamping and Hold Down Power
• Low Profile, Compact Design
• 17-4 PH Stainless Steel
• Smooth or Serrated
• Stainless steel screws and retaining rings are available for EDM applications

PATENT NO. 5964458

Dyna-Force Installation:

• Bore of the hole “L” distance from edge of workpiece
• Drill and tap “H” to mount clamp in pocket
• Machine counter bore if recessing clamp into fixture
• Provide a back stop to locate the part

NOTES:

• “N*” To have rest pad flush with fixture, use the dimension provided. To have the rest pad above the fixture surface, reduce the depth accordingly.
• For dimensions I and J, use a tolerance of +.1/-0mm. For dimension L and O, use +.1/-.1mm.

Specifications:

Click to View Specifications

View the Instruction Sheet