Mitutoyo ABSOLUTE Digimatic Bore Gages, Series 511

This ABSOLUTE Digimatic bore gage is exclusively designed for ID measurement.

Features:

• The minimum value holding function provides the easy detection of hole diameter.
  
• Up to three sets of master value and upper/lower tolerance value can be memorized.
  
• An analog bar indicator is integrated to enhance the intuition in reading.
  
• Go/no-go judgment is performed by setting the upper and lower tolerances.
  
• Up to four rods (250mm or 500mm) can be used.

Technical Data:

• Accuracy: Wide Range: 0.003mm / .00012
  Resolution: .00005″ / 0.001mm
  
• Display: LCD
  
• Battery: SR44 (1 pc.) (938882)
  
• Battery life: Approx. 9 months for normal use
  
• Dust/Water protection level: Conforming to IP53

Functions:

• Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only), Data output, go/no-go tolerance judgment
  
• Alarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error

For more details and Specifications on each item, copy the Item Number below into the search bar at the top of the page.