TMX CAT50 End Mill Holder, 7/8″ x 3-1/2″ – 8-110-5200

Features:

• No. of Side Locking Set Screws: 2
• Flange Screws: M5 x .8 x 5mm long = 8-815-185
• Balanced and certified to 15,000 RPM/G6.3
• TMX DIN AD/B design as standard. AD is coolant through the spindle; B is coolant through the flange
• Will accommodate single and double ended end mills
• Low harmonic vibration increases tool life and improves surface finish
• Machined and shot blast exterior for surface integrity

Dimensional Information:

• AT3 taper accuracy for excellent holder / spindle engagement
• Draw bar thread for CAT 50 = 1″ -8
• ANSI B5.50-1994
• H5 inside diameter tolerance
• Maximum run out is .0002(.005mm) TIR for concentric machining

Item No. 8-110-5200 ID D1 7/8″ Gage Length L1 3-1/2″ Major Dia. D2 1.88″ Locking Screw 1 L2 .65″ Locking Screw 2 L3 .81 Coolant Through Type AD/B Socket Set Screw Size 5/8-18 x 9/16

For More TMX CAT50 End Mill HoldersClick Here