Champion Proline Straight Shank Rotary Rebar Cutter, 3/4″ Dia. – CM79-3/4

• For drilling through embedded rebar and surrounding concrete. Use in any 1/2 capacity or larger drill motor with a three jaw chuck.
• Carbide Tipped.
• 1/2 Shank.
• Overall length: 12

Application:

(1) Drill first with a hammer drill bit until reaching rebar.
(2) Replace bit with CM79 then penetrate rebar
(3) After completion of rebar drilling, complete drilling with hammer bit

For More Champion Proline Straight & SDS Plus Shank Rotary Rebar CuttersClick Here