Starrett Combination Steel Rule Depth and Angle Gage, 0-6″, EDP 51074 – 236-1

Combination Steel Rule Depth and Angle Gage, English, 0-6″ Range, 32nds & 64ths

The Combination Steel Rule Depth/Angle Gage is a versatile gage that can be used for calipering, a depth gage by reversing the rule, a protractor, and a hook rule when removed from the tool. It is a simple, handy tool that is a welcome addition to any machinist’s toolbox.

Features

• Head is graduated both left and right to 30, 45 and 60 degrees
  
• Rule can be set to 30, 45, and 60 degrees
  
• Head is made of hardened steel, ground, and nicely polished 2-5/8″ (66mm) long and 1/8″ (3mm) wide
  
• One side of base is cut out to permit easier and more accurate readings
  
• Center of head is recessed so that the tool will lay flat to permit easier and more accurate measurements
  
• Tempered rule that has been accurately machined divided, is smoothly fitted to the head and can be locked in position by a knurled nut

Specifications

• Made in America: Yes
  Range (in): 0-6″
  Graduations (in): 32nds, 64ths

See all Starrett 236, 236H Combination Steel Rule Depth and Angle Gages