Mahr Inductive Probe Millimar P1300 TB Half Bridge – 4400191

• Tesa compatibility
• Tesa Mahr half-bridge technology
• Very easy to service: cables and probes can be separated via the plug in connector
• Easy to convert to pneumatic lifting
• Measuring pin mounted in ball-bearing guide
• Chemical resistance data: resistant to oil, gasoline, water and aliphatics. Moderately resistant to acids, bases, solvents and ozone

Specifications:

• Measuring range from -2 mm
• Measuring range up to 2 mm
• Distance of lower stop MIN -2.2 mm
• Distance of lower stop MAX 0 mm
• Distance of upper stop MIN 2.2 mm
• Distance of upper stop MAX 4.4 mm
• Lifter / retractionCompressed air retraction (max. 1 bar)
• Measuring forceDepending upon air pressure
• Increase in measuring force 0,3 N/mm
• Sensitivity deviation 0.3 %
• Repeatability fw (m) 0.1 m
• Hysteresis fu (m) 0.5 m
• Linearity deviation within +/- 0,5 mm 0.4 m
• Linearity deviation within +/- 1,0 mm 1.5 m
• Linearity deviation within +/- 2,0 mm 3 m
• IP protection category IP 64
• Cable length 2.5 m
• Temperature coefficient 0.15 m/C

For More Mahr Inductive Probes Millimar P1300 SeriesClick Here