Terra Carbide Square Indexable Carbide Milling Insert, 20 Relief Angle, 3/4″ I.C., 3/16″ Thick – SEC633 APC2

• ANSI/ISO Standard Milling Inserts.
• APC2 -can be used on high-temp alloys at lower cutting speeds (e.g. Titanium, Inconels, etc.) Very slight honed edge.
• APC5 – can be used at slower speeds. Honed edge.
• APC5T – can be used for extended tool life on steels and stainless materials. Honed edge.
• Maximum Depth of Cut:0.320″
• Insert Radius:0.047″
• Coating: Uncoated
• ForHard Materials, Cast Iron, Non Ferrous, HRSA EXOTIC

For More Terra Carbide Indexable Carbide Milling InsertsClick Here